ImmersionRC | ImmersionRC RF Power Meter
3
In order to connect the power meter, with attached attenuator, to an RF source, it is recommended to
use either a very short length of coaxial cable, with male SMA on each end, or a short adapter.
A suitable semi-rigid cable is included with the RF power meter.
HINT: Since SMA connectors are easily damaged by repeated connection/disconnection, it is
recommended to connect the attenuator directly to the power meter, and use the SMA adapter to
connect to the RF source. The adapter will be much cheaper to replace than the attenuator, if the
connector is damaged.
User Interface
The LCD display shows the measured attenuation value, along with the attenuation value, and the
current frequency.
Three push-buttons are available, and comprise the entire (simple) user-interface.
