IMKO TRIME-PICO 32, Manual

Page: 46 / 48

Manual TRIME_PICO64-32 Version 2_0 2017-05-30
Page 46
Hazard Warnings
Danger due to improper operation. The sensor or the measuring system may
only be operated by instructed personnel. The operating personnel must
have read and understood the operating instructions.
Danger by electricity
The hand-held meter must not be immersed in water or other liquids. The
sensor is insensitive to moisture contained in the typically measured prod-
ucts. Only connect the hand-held meter to a properly installed outlet with the
supplied voltage supply cable, the voltage of which corresponds to the tech-
nical data. Make sure that the power outlet is well accessible, so that you can unplug the
power supply quickly if necessary. Use only the adapter that is suitable for your outlet.
Only operate the meter with the supplied original accessories. If you need additional accessories
or replacement, please contact the manufacturer.
Do not use the meter in following case:
- if the measuring instrument, sensor, plug-in power supply or accessories are damaged,
- the sensor or the measuring system does not operate as intended,
- the power cord or plug is damaged,
- the sensor or the measuring system has fallen down.
Unplug the power supply from the wall outlet in following case:
- if you do not use the sensor or the measuring system for an extended period of time,
- before cleaning, unpacking or changing the sensor or the measuring system,
- if you are working inside the sensor or measuring instrument, e.g. connect devices,
- if a fault occurs during operation,
- during thunderstorms.
Caution - Property damage
Ensure that there is a sufficient distance to strong heat sources such as heat-
ing plates, heating pipes. Disconnect the sensor or handheld device from oth-
er devices before relocating or transporting it. Disconnect the connectors on
the device.
Do not use aggressive chemical cleaning agents, scouring agents, hard sponges or the like.