IMKO SONO-VARIO LD, User Manual

Page: 24 / 44

24/44
Note 1:
In the Device-Manager passes it as follows:
Control Panel

System

Hardware

Device-Manager
Under the entry “Ports (COM & LPT) now the
item “USB Serial Port (COMx)” is found.
COMx set must be between COM
1….COM9 and it should be ensured that there is no double
occupancy of the interfaces.
If it comes to conflicts among the serial port or the USB-SM has been found in a higher COM-port, the
COM port number can be adjusted manually:
By double clicking on "USB Serial Port" you can go into the properties menu, where you see
"connection settings"
– with "Advanced" button, the COM port number can be switched to a free
number.
After changing the COMx port settings, SONO-CONFIG must be restarted.