background image

 

 
 
 

____________________________________________________________________________________ 

STI S.r.l.

 

– Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY        www.imi-critical.com 

 
Manual 2071, rev.07 02/2019 

– BV

 

 

GENERAL INFORMATION 

1.1  General Warnings 

Important 

This Instruction Manual is an integral part of the machine, it should be carefully 
read before carrying out any operation and it should be kept for future references. 
The  operators  shall  adopt  the  safety  precautions  required  by  the  country  where 
the product is installed. 
This Instruction Manual is realized in accordance with the Directive 2006/42/CE.

 

 

1.2  Generalities 

STI S.r.l. accessory are conceived, manufactured and controlled according to the Quality Control System in 
compliance with EN ISO 9001 International Standard. 
 

1.3  Manufacturer 

With respect to Machinery Directive 2006/42/EC, the Manufacturer of the described BV Big Volume Booster 
is STI S.r.l. as specified on the label. 

 

STI S.r.l. Via Dei Caravaggi 15 
24040 Levate (BG) Italy 
Tel. +39 035 2928.2 
Fax +39 035 2928.247 

[email protected]

 

 

1.4  Terms and conditions  

STI  S.r.l.  guarantees  each  single  product  to  be  free  from  defects  and  to  conform  to  current  goods 
specifications.  The  warranty  period  is  one  year  from  the  date  of  installation  by  the  first  user,  or  eighteen 
months from the date of shipment to the first user, whichever occurs first. 

The  warranty  does  not  cover  special  products  or  components  not  covered  by  warranty  in  their  turn  by 
subcontractors. No warranty is given for products which have been subject to improper storage, improper 
installation, misuse, corrosion, or which have been modified or repaired by unauthorised personnel: it is not 
advisable that customer or end users modify the device characteristics.  
 

1.5 

Manufacturer’s Liability  

STI S.r.l. declines all liability in the event of:  

use of the BV in contravention of local safety at work legislation;  

incorrect installation, disregard or incorrect application of the instructions provided on the BV label and 
in this manual;  

modifications without STI’s authorisation;  

work done on the unit by unqualified or unsuitable persons. 

 

 

Summary of Contents for STI BV


























Reviews: