13
Electronic Pressure Sensor 34D
Operation manual
7503756000000050 05/2019
9.
Parameter setting
During parameter setting the unit remains in the operating mode. It continues to monitor with the
existing parameters until the parameter setting has been completed.
9.1 Parameter setting in general
1
Select parameter
►
Press [●] to get to the menu.
►
Press [▲] or [▼] until the requested
parameter is displayed.
2
Set parameter value
►
Press [●] to edit the selected para
-meter.
►
Press [▲] or [▼] for min. 2 s.
> After 2 s: setting value is changed:
incrementally by pressing the button
once or continuously by keeping the
button pressed.
Numerical values are incremented continuously with
▲
[▲] or decremented with [▼].
▼
] .
3
Acknowledge parameter
value
►
Briefly press [●].
> The parameter is displayed again.
Set other parameters
►
Press [▲] or [▼] until the requested parameter is displayed.
Finish parameter setting
►
Press [▲] or [▼] several times until the current measured value is displayed or wait for 30 s. >
The unit returns to the process value display.
