Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. © 2017 Norgren Automation Solutions, LLC
Gripper close port
I. Scope:
This document instructs the operator how to use the IMI Norgren PGS20 and PGS42 Grippers. This user instruction covers
basic gripper set-up and operation, including: port sizes and function, manual unlocking of jaws, jaw replacement, setting
jaw open angle, and accessory mounting.
II. Applicable Documents:
12686SP – Sales Page – PGS20RXXXXXXXXX (Regular Jaw)
12687SP – Sales Page – PGS20FXXXXXXXXX (Flange Jaw)
12688SP – Sales Page – PGS20C/D/EXXXXXXXXX (Chisel Jaw)
12689SP – Sales Page – PGS20S/T/UXXXXXXXXX (Shovel Jaw)
12647SP – Spare Parts List for PGS20 Gripper Series
13213SP – Sales Page – PGS42RXXXXXXXXX (Regular Jaw)
13227SP – Sales Page – PGS42C/D/EXXXXXXXXX (Chisel Jaw)
13284SP – Sales Page – PGS20S/T/UXXXXXXXXX (Shovel Jaw)
13291SP – Sales Page – PGS42FXXXXXXXXX (Flange Jaw)
13214SP – Spare Parts List for PGS42 Gripper Series
III. Procedures:
A. Port Size and Operation
1.
Po
rts are available in 1/8" NPS or 1/8 Rc. The closed port is marked with a “C”.
03
2/17
12680UI REV: 003
User Instructions for PGS20 and PGS42 Grippers
Gripper open port
B. Gripper Unlock
1.
Release jaw by using a hex key or straight blade screwdriver and pushing on drive pin through slot in side plate
