2. Basic Operation
2. Basic Operation
2. Basic Operation
2. Basic Operation
1. Turn on:
Turn on:
Turn on:
Turn on: Turn on using the on/off switch. This releases the pendulum from its
lock position, activates 1 horizontal beam and allows all beams to be turned on
using the buttons on the control panel.
2. Horizontal Beam:
Horizontal Beam:
Horizontal Beam:
Horizontal Beam: To turn on 360°horizontal laser line, press the horizontal
button once.
Press the horizontal button once again to turn horizontal beam off.
3. Vertical Beams:
Vertical Beams:
Vertical Beams:
Vertical Beams: To turn on vertical beams press the vertical beam button, this
activates 2 opposite vertical beams and the plumb spot.
Press the vertical button again to activate the remaining vertical beams, you now
have 4 vertical beams emitted at 90°to each other also forming a cross on the
ceiling. - Press vertical button again to turn vertical beams off.
4. Turn off:
Turn off:
Turn off:
Turn off: To turn off completely, switch the on/off switch to off position, this
deactivates all beams and locks pendulum.
-The level vial is a guide only, unit will self level providing it’s within 3º of level.-
3. Outdoor Use
3. Outdoor Use
3. Outdoor Use
3. Outdoor Use LX55D
LX55D
LX55D
LX55D
(with detector)
(with detector)
(with detector)
(with detector)
For greater versatility this tool has a pulse mode which enables the tool to be
used in conjunction with a detector (LX55D) extending the tools range to 50m.
-To enable outdoor mode, turn instrument laser beam on then press the outdoor
mode switch once. This enables the beam pulsate mode so it can be picked up
by the detector.
-Turn on detector (on/off switch) You can now check level and 90º set-outs
outdoors using optional detector
-Press the outdoor mode button once again to disable outdoor mode