7
WARNING!
● This product is a commercial machine and it must be operated by trained cook.
● Do not dismantle and refit the machine.
Do not lift the upper module plate with sudden force and tilted installation.
The dismantlement and alteration can cause serious accident happens.
●
Before cleaning, unplug the machine and cut off power supply.
Do not spray water directly to the product.
Water can conduct electricity and electricity leakage happens.
●
Do not pat the product and put heavy object onto the product.
Incorrect operation can cause the equipment be damaged and dangerous.
●
High temperature will cause scald.
When the equipment is in use and before or after using it, do not touch the box and
module plate because of high temperature.
● Do not use any power supply which is not coordinated with safety standards.
NOTICE!
●
When the thunderstorm is coming, the electricity supply must be cut off soon.
It will avoid the equipment being damaged in cause of lightning stroke.
● Do not destroy the control panel and the surface of the machine with hard or sharp
things.
● When the machine finishes using , user should close main switch.
●
The installation and maintenance of circuit must be done by certificated special
professionals.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a calamity.
F. Operation Instruction
1. Before using, check whether the power supply installation is regular to make sure the
supplied voltage is coordinated with the using one.
2. Put the plug in the socket and turn on the power.
3. Turn the temperature controller clockwise to the temperature needed. The yellow
indicator is on that shows heating wire begins to heat and the upper and lower griddle
begins to raise temperature.
4. Temperature can be adjusted according to different food preferably within 180
℃
~250
℃
.
About 8 minutes is needed for the temperature to be raised to 250
℃
from the power is
on.
5. When the temperature reaches 250
℃
, lift the upper module plate to a suitable place by
operation handle. Put some edible vegetable oil on the lower module plate and constantly
