background image

10 

 

Waste collection to classification, managed by the manufacturer, the user has 

the  responsibility  to  contact  the  manufacturers,  manufacturers  should  be 

classified collection of waste in accordance with the waste disposal system. 

Classified  collection  and  recycling  of  waste  disposal  equipment  will  help  to  protect  the 

natural resources. 

To ensure recycling that can protect human health and the environment. (export

 

dedicated ) 

 

Chapter 10    Warranty 

 

iMettos warrants to the original purchaser of every new product, under normal and proper 
use  and  maintenance  service  as  specified  by  iMettos  and  upon  proper  installation  and 
start-up  in  accordance  with  the  instruction  packet  sup

plied  with  each  unit.  iMettos’ 

obligation under this warranty is limited to a period of two (2) year from the date of original 
installation. 

 

WARRANTY CLAIMS 

 

All claims for parts must be made directly through iMettos. All claims should include: 
Personal Details:                                                              Products Details: 
Your name:                                                                        Model number: 
Your company:                                                                  Serial number of the product: 
Address:                                                                            Date of purchase: 
Email:                                                                                Proof of purchase : 
Phone: 
 
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.) 
Please send the above information to [email protected] 
Our warranty departments will according to the actual situation and reply you   
within 24hours. 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for HLQ-14













Reviews: