Imetec N1701, Operating Instructions Manual, Page: 12 / 48

EN
10
• AUTO SHUT-OFF – then the timer stops, the electric blanket will automatically turn off and the standby display (13) (Fig.
[C]) will light up in blue.
• To repeat the same shutdown time, press the TIMER selector (11) (Fig. [C]) again when the standby display (13) (Fig. [C])
lights up in blue.
DISCONNECTION
• Select the OFF position on the back of the control unit (14) (Fig. [C]).
USING THE PRODUCT VIA THE BLUETOOTH
®
Tenacta Group S.p.A. hereby declares that this electric blanket complies with the essential requirements and other pertinent
provisions set forth by directive 1999/5/EC. The DC is provided at the end of the manual in original language.
Transmission frequency: 2402.00-2480.00 MHz
Compatible with Bluetooth® Low Energy (4.0) appliances and Android 4.4 operative systems or later and iOS 8 or later.
CONNECTING AND REMOVING THE TEMPERATURE ADJUSTMENT CONTROL FIG. (B)
IMPORTANT!
The electric blanket must only be used with the control unit supplied. The relative model is specified
on the label sewn onto the product.
• Insert the plug (7) in the socket (6) to connect the temperature control to the electric blanket.
• The same must be done with the second plug in the double bed model.
• Disconnect the plug (7) from the electric blanket by pressing the pushbuttons at the sides of the plug (6).
SWITCHING THE ELECTRIC BLANKET ON AND SELECTING THE CORRECT TEMPERATURE FIG. (C)
IMPORTANT!
DO NOT place the control unit under the pillow or under the sheets when in use.
IMPORTANT!
DO NOT use FAST HEAT temperature 6 while in bed.
Turn the electric blanket on from the back of the control unit by placing the switch to ON (I) (14) (Fig. [C]).
Turn on the Bluetooth
®
function on your smartphone.
Download IMETEC’S REMOTE APP from www.imetec.com or from the Apple Store or Google Play.
When using it for the first time, you need to pair / configure your smartphone or tablet to the control unit. The pairing procedure
between the smartphone/tablet and the control unit is clearly reported in the App. This procedure must be carried out:
• When using the APP for the first time.
• If the memory of the smartphone or tablet and/or control unit is lost.
When the coupling procedure is in progress, the Bluetooth
®
(8) display (Fig. [C]) flashes.
When the control unit is controlled remotely, the Bluetooth
®
(8) display (Fig. [C]) lights up.
The app will guide you through the following procedures:
• coupling between the smartphone or tablet and the control unit
• configuration
• temperature selection
• switch-on and switch-off
• programming the switch-on time
• programming the switch-off time
DISCONNECTION
• Select the OFF position on the back of the control unit O (14) (Fig. [C]).