Imetec GK608, Operating Instructions Manual

Page: 26 / 170

23
EN
DESCRIPTION OF THE APPLIANCE AND
ITS ACCESSORIES
Refer to Figure [A] in the Illustrative Guide to check the contents of
the package. The product code (GK618 or GK608) is indicated on
the back.
1. Socket for charging batteries
and operation with mains
power
2. LED charging indicator light
3. ON/OFF button
4. Cut micro-adjustment button
(model GK618)
5. U-blade head
6. Vertical nose and ear trimmer
7. Body shaver head
(model GK618)
8. Adjustable U-blade comb (8-
9-10-11-12mm)
9. Adjustable U-blade comb (3-
4-5-6-7mm)
10. Support base
11. AC/DC power supply unit with
power cable
12. Lubricating oil for the blades
13. Cleaner brush
14. Case (model GK618)
TD. Technical Data
CHARGING THE APPLIANCE
Charge the appliance for 8 hours until it is completely charged before
starting to use it for the first time.
Always make sure that the appliance is completely dry before using
or charging.
• Switch the appliance off.
• Plug the power supply unit (11) into a socket.
Do not leave the appliance permanently connected to the mains
power socket.
Always switch the beard trimmer off and unplug the plug from the
charger socket after charging is complete.
To extend the lifespan of the beard trimmer battery:
• Do not charge the battery every day. Preferably discharge the
battery completely every six months and then charge for 12 hours.
• Do not charge the appliance for longer than the recommended
charge time. Overcharging reduces the lifespan of rechargeable