IMC WasteStation Compact Installation And Operating Manual Download Page 6 | Manualshive

Page: 6 / 25

IMC WasteStation Compact Installation And Operating Manual Download Page 6

6 |

P a g e

WasteStation Compact

Please observe the following instructions carefully.

INSTALLATION OPTIONS

FOR THE INSTALLER

These Instructions contain important information designed to help the user obtain the maximum
benefit from the investment in an IMC WasteStation Compact.
Please read them carefully before starting work, and consult with the supplier in the event of any
queries.
Be sure to leave this Instruction Manual with the user after the installation of the machine is
complete.

The machine is operated from the wall mounted control box.

SELECTION OF SITE

Select the site of the WasteStation Compact with care so that it is convenient both for the major
source of food waste and for access by machine operators. The machine should be installed as
close to the existing drains as is reasonably practicable.

Install so that the front of the machine with the controls on faces the operator.

«
...
4
5
6
7
8
...
»

Summary of Contents for WasteStation Compact


























Reviews:

No comments