4
MOBILE HAND WASH UNIT
INSTALLATION
These Instructions contain important information designed to help the user obtain
the maximum benefit from their investment in an IMC Mobile Hand Wash Unit.
Please read them carefully before starting work and consult with your
distributor/supplier in the event of any queries.
Be sure to leave this Instruction Manual with the user after installation of the
machine is complete.
Procedure
WARNING
The following table shows the weight and the minimum quantity of
people required to lift each unit:
Net Weight
Quantity of People
IMC Mobile Hand Wash Unit
33.6 kg
2
Before connecting the unit to a power supply; remove all packaging and ensure
that the unit is checked over for damage, any damage must be reported to the
carrier or distributor/supplier immediately.
Remove any protective plastic coating on the unit.
Water may be present in the tanks of the unit due to rigorous testing prior to
dispatch.
Location
The Mobile Hand Wash Unit is only suitable for use where there is no risk for the
unit to be adversely affected by its surrounding environment or for the electrical
components/connections to get wet.
The unit must be stationed on a flat surface capable of safely supporting the units
weight when fully laden with water.
Ensure that the surface which the unit is to be stationed on is dry to avoid any
water ingress into the lower electrical compartment.
Always ensure that the unit is unplugged before moving, move the unit using the
handle on the back which also acts as a wrap bracket to hold the power cord in
place when not in use.
The unit must be stationed at a reasonable distance from the power outlet socket
so as not to put strain on the electrical connections, or causing a trip hazard. The
power cord should not come in contact with any hot surfaces at any time.
