resume operation by pressing the start button. Should a stone damage the knife
blades they must be replaced as further use could break the blades.
This Chipper is designed for batch process work; switch the machine off once
all the potatoes have been cut. The motor is fitted with a thermal trip that will
stop the machine if the motor overheats. This protection feature will
automatically reset itself when it cools down but it is necessary to wait a few
minutes for this to happen.
The machine will switch itself off in the event of failure of the electricity supply
whilst operating. When the supply is restored the machine must again be
switched on. It is fitted with no-volt release.
KNIFE BLOCK FITTING
Summary of Contents for CS-C1
Page 9: ...WIRING DIAGRAM FOR CHIPPER...
Page 10: ...EXPLODED VIEW...
Page 11: ...ELECTRICAL CONTROL PARTS...