IMC CRONOSflex Getting Started Download

Page: 9 / 64

imc CRONOSflex Getting Started Version 1.8 - 08.01.2014

imc CRONOSflex Description of the system

Even an entire CRONOS

flex

system, consisting of the base unit and multiple signal conditioners can be

integrated into the 3rd party system having a “3rd-party” EtherCAT bus-master: For this purpose, the
CRONOS

flex

Base Unit can be equipped with an EtherCAT device interface, making the entire device

available as a data source in the sense of an EtherCAT slave device. The respective interface module
(ECAT-IF) is available as one of multiple optional fieldbus expansions of the CRONOS

flex

Base Unit. To

parameterize this sub-system in turn, the imc STUDIO operating software can be used.

imc CRONOS

flex

as complete slave subsystem within an EtherCAT-based 3rd party system

Summary of Contents for CRONOSflex

































































Search results

Summary of Contents for CRONOSflex

Reviews:

Related manuals for CRONOSflex

Brands by name

Popular brands

IMC CRONOSflex, Getting Started

Search results

Summary of Contents for CRONOSflex

Reviews:

Related manuals for CRONOSflex

Brands by name

Popular brands