background image

 

 

Configuration PC 

This section introduces you how to configuration TCP/IP protocol into your personal 

computer. And suppose you have been successfully installed one network card on your personal 
computer. 

 
Windows 98/Me 

1

Click the Start button, select Settings, then select Control Panel 

2

Double-click the Network Icon 

3

In the configuration tab, select the TCP/IP protocol line that is associated with your 

network card/adapter. If there is no TCP/IP line listed, you will need to first install the TCP/IP 
protocol. 

4

Click the Properties button, then choose the IP Address tab. Select Specify an IP address. 

5

enter an ip address in the ip field, within the range of 192.168.1.X(X can’t be 1). 

6

After clicking OK, windows might ask you to restart the PC. Click Yes. 

 

 
Windows 2000/XP 

1

click start, settings, then click control panel. 

2

right-click the network icon and select open to open the network connections dialog. 

3

right-click the appropriate LAN connection and click properties to open the properties 

dialog for the connection: 

4

check the box next to Internet Protocol (TCP/IP) and click properties. 

5

in the TCP/IP Properties dialog box, click the radio button next to use the following ip 

address. 

6

enter an IP address in the IP field, within the range of 192.168.1.X(X can’t be 1). 
 

 

Summary of Contents for Wireless Outdoor Bridge XI-1500-IH














Reviews: