Hardware Installation
Take the following steps to set up the Wireless Outdoor Bridge.
◆
Hardware equipment
◆
Fixation
First you should fix the Wireless Outdoor Bridge, the following figure show it:
◆
Connect the Ethernet Cable
The Wireless Outdoor Bridge supports 10/100M Ethernet connection. Attach UTP Ethernet
cable to the RJ-45 connector on the Wireless Outdoor Bridge. Then connect the other end of the
RJ-45 cable to a hub or a station. Please note that, use the crossover cable when you desire to
connect the Wireless Outdoor Bridge to a PC.
Put UTP cable through the water-joint
Make the crystal head (not cross-over cable):
white orange
∣
orange white green
∣
blue white blue
∣
green white brown
∣
brown
4
