IMC Networks McBasic TP/BNC, Operation Manual

Page: 7 / 12

3
4
Specifications
Environmental
Operating Temperature: 32° - 104° F (0° - 40° C)
Storage Temperature: 0° - 160° F (-20° - 70° C)
Humidity: 5 - 90% non-condensing, 0 – 10,000 ft. altitude)
Power
AC Input Load: 100-240V±10% ~ 50/60 Hz, 0.1/0.05A
Dimensions
1.64"H x 4.75"W x 4.54"D (4.17cm x 12.07cm x 11.53cm)
Shipping weight: 1.3 lbs. (0.6 kg)
IMC Networks Technical Support
Tel: ( 949)-465-3000; (800)-624-1070 (in U.S. and Canada)
+32-16-550880 (Europe)
Fax: ( 949)-465-3020
E-mail: techsupport@imcnetworks.com
Web site: www.imcnetworks.com
Installing the McBasic TP/BNC
The McBasic TP/BNC converters come ready to install. Deploy McBasic
TP/BNC units in pairs, or connect a McBasic TP/BNC converter to another
IMC Networks converter. To install a McBasic TP/BNC converter, first
make sure that the unit is placed on a flat surface. Attach the cables
between the McBasic TP/BNC and each device that will be interconnect-
ed, then plug the unit into a reliable, filtered power source. Make sure to
connect the BNC port of the McBasic TP/BNC converter only to 50
Ω coax-
ial cable.
When connecting an Ethernet cable to the McBasic TP/BNC, make sure
the cable corresponds to the crossover/pass-through switch. When using a
crossover cable, make sure the switch is out, in the “X” setting. The switch
can be pressed again to change the setting.