10
As the shape and size of the lining vary, the distance of feeding the lining also needs
to be adjusted：
02800210102800 long rod with round 12mm lining is assembled in hole 1（See parts manual
for details of parts assembly）；
02800210102800 long rod with round 15mm lining is assembled in hole 2;
02800210102800 long rod with square 10 * 20MM lining is assembled in hole 3
8 Install the moving knife according to step 4 of 6.2.
9 Loosen the two set screws of the eccentric (left in the figure below), turn the eccentric
manually to the position as shown in the figure (right in the figure below), and tighten
the screws.
10 Adjust the feed rate of moving knife according to 6.1.
11 Reassemble according to the above disassembly steps and complete the mould change.
3
2
1
Fastening
screw
