7
6、CHANGEOVER OPERATION
6.1.STEPS OF ADJUSTING THE FEED RATE OF MOVING KNIFE
6.2 Replacement steps of moving knife and solid knife
Right cover
1. Remove the right cover fixing
screw and remove the right cover
2. Loosen the fixing block screws
3. Move the knife up manually, about
1.5mm away from the fixed knife
(through the lining clearance), and
tighten the fixing block screws.
Fixing block screw
4. Assemble the cover disassembled
in step 1 and adjust the knife.
1. Remove the knife cover fixing screw
and remove the knife cover assembly
○
1
