IMB MB4006A, Instruction Manual

Page: 15 / 22

11
6.3 Cleaning of fan filter element
handle
fil
When the fan is overheated or cleaned according to the specified cycle：
Manually remove the two plum handle, take out the filter element, clean it up, and then
reassemble. If there is overheating protection, you need to wait for the fan temperature
to decrease before the machine can operate normally。
6.4 Temperature control setting of heating unit
Press ，Turn on the ironing machine, the green number is the set temperature, and the
red number is the real-time temperature，
Setting temperature regulation: in the temperature control panel，press ，Decrease the
set temperature，press Increase set temperature。