IMB MB4006A, Instruction Manual

Page: 11 / 22

7
5、Operating instructions
5.1 Preparation before operation
√ When the operator checks, the machine head should be in the stop state
√ Check whether the sewing thread is properly put on
√ Check whether the needle has been installed
√ Clean up the debris on the machine table to ensure that there will be no debris
obstructing the operation of the machine
√ Check that the eye guard is properly installed
5.2 Operation process description
5.2.1 Boot device
Turn the power switch to on at 90 ° to power on the device. Select the language
in the boot interface to enter the main interface.
5.2. 2 Matching
Manually put the label paper into the label setting table, and click B in the main
interface ，Enter the benchmarking interface and click ，The machine
will automatically draw a piece of label paper, move it to the lower part of the heating
unit, and click the marking button ，If there is any deviation, fine tune the
position of the label according to step 6.1.