31
12. Maintenance and Cleaning
Servicing or repair may only be carried out by a specialist/specialist workshop. The product contains no parts that
require servicing. Therefore, never open/disassemble it.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.
Do not apply too much pressure to the display, this can cause scratch marks or failures of the display.
Dust can easily be removed with a long-hair, soft and clean brush and a vacuum cleaner.
Never use aggressive cleansing agents or other chemical solvents since this may damage the surface
of the housing or even impair operation.
13. Technical Data
a) Film Scanner
Optical resolution: ............................... 1800dpi
CMOS Sensor: .................................... 5 Mega pixels
Connection: ......................................... USB2.0
Integrated memory: ............................ 32MByte (part of it is required for internal purposes by the film scanner!)
Usable memory card .......................... SD, SDHC, MMC, xD, MS-Pro
Power saving mode: ........................... Power-off after about 30 minutes, when no key is pressed
Ambient temperature: ......................... 0°C to +35°C
Dimensions: ........................................ Approx. 220 x 208 x 147mm
Weight: ................................................ Approx. 870g
b) Mains Adapter
Input voltage: ...................................... 100-240V~, 50-60Hz
Output: ................................................. 5V=/1A
