20
5. Safety Information
The warranty/guarantee will be void if damage is incurred resulting from non-compliance with
these operating instructions. We assume no liability for any consequential damage!
Nor do we assume liability for damage to property or personal injury caused by improper use
or failure to observe the safety instructions. In such cases the warranty/guarantee is voided!
Dear customer, the following safety instructions and danger warnings are not only to protect your well-being but also
to protect the device. Please read the following points carefully:
• The unauthorized conversion and/or modification of the product is prohibited for safety and approval
reasons (CE).
• The product is intended to be used in dry indoor locations only. No part of the product must get damp
or wet; do not touch it with damp or wet hands.
There is danger to life through an electric shock!
Allow the device to reach room temperature before connecting and using it. This process may take
several hours.
• Never use the product immediately after it has been brought from a cold into a warm room. The
condensation water generated could destroy the product. The power pack also involves the risk of
a mortal electric shock!
• The product is not a toy. Devices operated using the mains voltage must be kept out of the reach of
children. Particular care must therefore be exercised if children are around. Never operate the device
unattended.
• Operate the product in a way that it is out of reach of children. Children could attempt to poke objects
into the product. The product will be damaged.
• Only operate the product via the included mains adapter. Do not use any other mains adapter for
power supply.
• Do not pull the plug-in power supply unit from the mains socket by pulling the cable.
• If the mains adapter is damaged, do not touch it. Danger to life from electrical current!
First power down the mains socket to which the mains adapter is connected (e.g. switch off the
respective fuse or turn out the fuse.
Then unplug the mains adapter from the mains socket. Dispose of the damaged mains adapter in an
environmentally compatible way. Do not use it anymore.
Replace it with a new mains adapter of the same specifications.
• The design of the mains plug complies with safety class II. The only permissible voltage source is a
proper mains socket (see section "Technical Data").
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Handle the product with care. It can be damaged by impact, blows or when dropped even from a low
height.
