Maximum safety
Special features:
Delta-peak sensitivity:
The automatic charge
termination program works on the principle of
the Delta-peak voltage detection.
Capacity limit:
The charging capacity always
calculated by multiple of the charging current
and time.If the charging capacity exceeds the
limit the process will be terminated automatically
when you set the maximum value.
Processing time limit:you can also restrain the
maximum process time to prevent from any
possible defect.
Input power monitor:
To protect the car battery
using as input power from being damaged the
voltage of it always monitored. lf it drops below
the lower limit the process will be ended
automatically.
li-ion/Polymer Balance Charger
Voltage balancer for Li-polymer battery inside
B5 has an individual-cell-voltage balancer inside.
So it does not need any balancer separately when
charging Lipo battery for cell balancing.
High-power and high-performance circuit
B5 employs the circuit that has maximum output
power of 50w. As a result it can charge up to 14
cells of Nicd/NiMH and 5 series of Li-poly
batteries with maximum current of 5.0A
LCD screen
(16chr.x2lines)
Charging lead
connector
(4mm banana female)
Input power
cable
(DC11-18V)
B5
START/ENTER
To resume or start
the operation
DEC/INC
To setect sub program
To alter the value
BATT TYPE/STOP
To select main program
To stop the operation
li-ion/Polymer Balance Charger