SELENIO™ SEL‐1DEC1/SEL‐1DEC2
Installation and Operation Manual
© 2014 Imagine Communications Corp. Proprietary and Confidential.
Version 7.0 | Page 41
IF PARAM[754]==3 THEN GPO1=1 GPO2=0
IF PARAM[754]==7 THEN GPO1=1 GPO2=1
IF PARAM[754]<2 || PARAM[754] > 3 && PARAM[754]<7 THEN GPO1=0 GPO2=0
In the above example, if the parameter with 754 as its ID has a current value that matches one of the
entries in the following table, the levels of GPI output 0 and GPI output 1 level will be assigned to the
corresponding values:
Table 9:
GPI Output Parameter Example
Value of Parameter
with ID of 754
GPI Output 0
GPI Output 1
0
Low
Low
1
Low
Low
2
Low
High
3
High
Low
4
Low
Low
5
Low
Low
6
Low
Low
7
High
High
Sample Use Cases
•
The GPI opens/closes based on bitrate value changes on the encoder.
•
The GPI opens/closes to indicate aspect ratio.
The ID's of the parameters can be found in a file that can be downloaded from the module. The URL's
for the file are as follows:
http://<IP address>/slot<slot#>/flx‐dec.html
Serial
Serial 1 and Serial 2
Serial x Function
This control sets the mode of the back module serial port. If the stream has external user data PES, the
data can be extracted using TS DEMUX Serial 1 Selector or Serial 2 Selector. This corresponds to
Program Data 1 and Program Data 2, respectively. Options for Serial x Function are:
