Imagine Platinum VX, Installation And Operation Manual

Page: 107 / 160

Platinum™ VX
Installation and Operation Manual
Parameters
© 2016 Imagine Communications Corp. Proprietary and Confidential. Version 1.2 | Page 107
SFP Module Input Parameters
In This Section
SFP+2E+DEC Dual Electrical Receiver Parameters ................................. 107
SFP+2ERX+NR Dual Electrical Receiver Parameters ............................... 107
OP+SFP+2ORX+NR Dual Optical Receiver Parameters .......................... 108
SFP+HDMI+IN Electrical Receiver Parameters ....................................... 108
Note: Specific parameters displayed correspond to the type of SFP.
SFP+2E+DEC Dual Electrical Receiver Parameters
Table 33: SFP+2E+DEC Module Input Parameters
Name Description Type Options
Input SFP ID Reports the type of SFP RO SFP+2E+DEC
Input Port Type SFP Description RO Dual Composite RX
Input SFP Temperature Displays the internal temperature
for the SFP RO Range:-198 to 262 °F
(-128 to 128 °C)
Signal Status Reports input signal status. Reports
the line rate if supported signal is
detected RO

525

625

No Signal

Unknown
ADC Out-of-Range Reports whether the input signal
level is out of ADC processing range RO

Yes

No
Decoder Video Standard Video standard for decoding RO

Auto (NTSC/PAL-B)

NTSC

PAL-B

NTSC-4.43

NTSC-J

PAL-M

PAL-N

PAL60
SFP+2ERX+NR Dual Electrical Receiver Parameters
Table 34: SFP+2ERX+NR Module Input Parameters
Name Description Type Options
Input SFP ID Reports the type of SFP RO SFP+2ERX+NR
Input Port Type SFP Description RO Dual SDI/ASI RX
Input SFP Temperature Displays the internal temperature
for the SFP RO Range:-198 to 262 °F
(-128 to 128 °C)