Platinum™ VX
Installation and Operation Manual
Platinum VX Installation
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
Version 1.2 | Page 20
2.
Attach the cable tie bar between the two support arms using the screws that are provided. You can
secure the cable tie bar through any of the screw holes on the arm.
Figure 2:
Attaching the Cable Tie Bar
3.
Push the Platinum VX into the front of the rack, and attach the frame’s front-mounting ears to the
rack using the appropriate screws (not provided).
4.
Slide the two arms into their slots from the back of the frame and attach the arms to the back of the
rack.
Figure 3:
Installed Support Arms and Cable Tie Bar
Rack Mounting for 4/8 RU Frames
Although the front mounting ears provide the main support for the frame within a rack, you must install
additional brackets at the rear of the unit to support the weight of cabling and frame stacking. Attach
the brackets to the frame using only the screws that are provided.
Note: The frame mounting ears and the rack support brackets are reversible. You can install them with
the ears at the front and support brackets at the rear, or with the ears at the rear and the support
brackets at the front.
