Platinum™ IP3
Installation and Operation Manual
Resource Module (PX-RES)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 44
PT-MADI4C-OBG/PT-MADI4O-OBG
PT-SR-OBG+/ PM-SR-OBG+
(PX) Frame Modules
(PT) Frame Modules
PX-576x1024-3G
PM-64x64-3G9
PX-ALARM-ATDM
PM-128x128-3G9
PX-ALARM-DATA
PT-128x256-3G15
PX-ATDM64-X28
PT-ALARM
PX-FRONT-FAN
PM-ATDM16-X9
PX-HSRAEC-OM
PT-ATDM16-X15
PX-RES
PT-HSRAEC-OM
PT-SYNC
Multiviewer Modules
PX-SXP-16x3
PX-SXP-32x6
PX-SXP-64x6
PX-SXP-16x3-O
PX-SXP-32x6-O
PX-SXP-64x6-O
PX-SXP-16x3-OD
PX-SXP-32x6-OD
PX-SXP-64x6-OD
PX-RES Parameters and Upgrades
For details, refer the
Platinum IP3 Controller User Manual
.
PX-RES Redundancy
Each Platinum IP3 frame can have up to two PX-RES modules operating redundantly. If one module
detects failure of the other, it switches over control and continues router operation.
The Resource module and optional Redundant Resource module are located in the middle of the frame.
Resource modules are visible when the front panel door is opened.
The PX-RES module is divided into three main areas:
User Interfaces (on page
Processing
System Interfaces
