NXAMP3801HDX/HDI
NEXIO AMP Generation 6 Hardware Installation and User Guide
29
175-100423-00
COM Ports
There are eight ports designated for RS-422 communications. They can all be used to control channels on the
server. A VTR may be connected to any port.
COM PORTS 1 - 8
can be configured to control various channels. (See
Table 2-5
). Each COM port can control
only one channel. The COM ports are codec based, therefore codec 0 = channel 1, etc. For setup of your server
refer to
NEXIO Config User Guide
.
Table 2-5
Default COM Port Channel Configurations
MODE
COM PORTS
2 channel mode
1
and
2
3 channel mode
1
,
2
,and
3
4 channel mode
1
,
2
,
3
,and
4
6 channel mode
1
,
2
,
3
,
4
,
5
and
6
8 channel mode
1
,
2
,
3
,
4
,
5
,
6
,
7
and
8
IPMI
The benefits of IPMI Dedicated LAN are console redirection and remote management without the need for
specific OS support. Since IMPI LAn is build into the NXAMP3801HDX/HDI, there is no need for external
terminal servers and power management units. Console redirection is useful during system restarts and when
there are network failures where as the remote management enable remote access to server’s environmental
status as well as power control (reset, reboot, shutdown, etc). All of the functionality comes regardless of the
state of the operating system.
Summary of Contents for Nexio AMP NX3801 HDI Gen6
