Imagine DES-3901-S, Installation And Operation Manual

Page: 6 / 79

iv DES-3901-S and DNS-3901-S Installation and Operation Manual
Contents
Installing DES-3901-S and DNS-3901-S Modules ............................... 10
Removing DES-3901-S and DNS-3901-S Modules ............................. 10
Setting Jumpers ..................................................................................... 11
Audio Tracking Pairs ............................................................................ 13
Upgrading DES-3901-S and DNS-3901-S Firmware ........................... 15
Upgrading the Firmware (Discovery Method) ............................... 15
Upgrading the Firmware (Drag-and-Drop Method) ...................... 17
Correcting a Failed Upgrading Procedure ............................................. 19
Setting the Module to Fail-Safe Loader Mode ............................... 19
Upgrading the Firmware in Fail-Safe Mode .................................. 19
Rebooting the Module .................................................................... 21
............................................................................................................... 22
Chapter 3: Operation
Overview ............................................................................................... 23
Operation Notes ..................................................................................... 24
Cross-Functional Parameter Changes ................................................... 25
Analog Video Input Standard (VideoSrc) ...................................... 25
Frame Synchronization Function (FSFunctn) ................................ 26
Frame Synchronizer Mode (FSMode) ........................................... 26
SDI Input Video Standard (SdiStdSet) .......................................... 27
Video Source Selections (VideoSrc) .............................................. 27
Video Standard Set (ViStdSet) ...................................................... 29
Navigating the Operator and All Lists .................................................. 30
Operator and All List Parameters .......................................................... 31
Setup Parameters ................................................................................... 38
Alarms ................................................................................................... 39
Alarm Synchronization .................................................................. 39
Identifying the Cause of an Alarm ................................................. 39
Enabling or Disabling an Alarm Parameter ................................... 40
Restoring Default Settings ............................................................. 40
Default Alarms ............................................................................... 40
NEOScope ............................................................................................. 41
State Recovery Parameter Availability ................................................. 41
LEDs and Module Indicators ................................................................ 42
General Information ....................................................................... 42
Card-Edge Locations ...................................................................... 43
LED Descriptions ........................................................................... 44
Module Indicators Descriptions ..................................................... 45