Selenio
TM
BNP User Guide, Release 3.7.1
142
- Grooming - Mapping
Program to Program Grooming
Use steps in this section to associate a specific input program with a selected output program.
Note:
If you are using the drag and drop method of program creation and you wish to configure or
enable Messaging System Settings for this program, you must modify the program after drag and
drop and then associate zones for the program as described in “Program Messaging System
Note:
As of BNP Release 3.7.1 the Element Manager allows you to groom an input Ghost program to an
output TS
1.
At the
Grooming
->
Mapping
tab screen, select and drag an input program and drop it onto a
specific output program (
) to present the
Configure Program Mapping
Grooming
tab
screen.
Figure 87.
Drag input program to output program
Drag selected program from
the input panel to a program
on the output panel.
2.
At the
Configure Program Mapping Grooming
tab screen, enter information to define the
mapping.
See the following tables for guidelines:
