13. Click “Next“.
14. You can configure the ICA session.
°§
Compress Data Stream - select this when connection is made with
modem (modem dial-up) or WAN(Wide Area Network).
°§
Enable Sound - select this if you use 10/100Base T as LAN (Local Area
Network). When using Sound through WAN and modem, increasing
usage of bandwidth causes some problems.
°§
If you use modem or WAN, set “Sound Quality“ to LOW and
“SpeedScreen“ to ON.
15. Click “Next“. Then, Firewall Settings window is displayed.
16. You can enter Firewall information in Firewall Settings window if the
network requires Firewall setup. Then, click “Finish“.
17. Since the installation of ICA connection is over, connection the server is
r e a d y .
16
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM
∆
‰¿Ã¡ˆ16
