A. The filter can be removed for cleaning or replace-
ment (see CHECKING AND CLEANING THE FIL-
TER on page 13).
B. The underwater light can be used for night opera-
tion (see USING THE CONTROLS on page 12). The
spa includes both red and blue covers for the light.
C. The temperature probe monitors water temperature.
D. The four adjustable, directional jets can be pivot-
ed to direct their water flow. To open the jets, turn
the rims counterclockwise; to close the jets, turn
the rims clockwise. If no air flows through the jets,
turn the jets counterclockwise. Close the jets to
increase the water pressure to other jets.
E. The two small adjustable, directional jets can be
pivoted to direct their water flow. Turn the rims of
the jets to open and close them.
F. The two suction fittings provide water to the
pumps. The suction covers should always be in
place over the fittings. Never operate the spa with-
out the suction covers in place.
G. An optional ozone generator can be purchased and
installed to utilize the ozone jet. Ozone helps sani-
tize the spa with minimal chemical treatment.
H. The console controls the spa jets, turns the under-
water light on and off, and adjusts the water tem-
perature setting (see USING THE CONTROLS on
page 12).
I. The two air controls regulate the air flow to the
hydrotherapy jets.
J. The adjustable, pulsing jet produces a soothing,
pulsing massage action. To open the jet, turn the
rim counterclockwise; to close the jet, turn the rim
clockwise.
K. The four rotary jets provide a spinning massage.
L. The skimmer cleans the surface of the water.
M. The three variable-flow jets are fully adjustable.
Turn the outer rings to regulate the flow.
N. The power massage jet provides a soothing mas-
sage to your lower back. Turn the outer ring to reg-
ulate the flow.
11
Spa Shell Diagram
A
L
M
D
I
B
H
F
E
E
M
D
D
J
K
K
K
G
C
N
M
D