With the help of customer input, we have deter-
mined key information you need to be aware of to
get the most enjoyment from your spa. Please
review this summary carefully.
Choosing a Location for the Spa
¥ The diameter of the tub is 69Ó
¥ Make sure there is room for the spa in the location
you choose
¥ Make sure it is easy to get in and out of the spa
¥ Make sure you can access the mechanical
components
¥ Make sure the room is compatible with the extra
humidity released by the spa
See ÒChoosing a Location for the Hydrotherapy SpaÓ
in the userÕs manual for further important information.
Plugging in the Spa
¥ Make sure the spa is plugged into a dedicated circuit
capable of carrying at least 15amps
¥ Make sure no other electrical appliances or lights
are plugged into the same circuit
¥ It may be necessary to install a new circuit with its
own breaker
¥ Do
NOT
use any kind of extension cord with the spa.
See ÒUsing the Hydrotherapy SpaÓ in the userÕs manu-
al for further important information.
Cleaning and Maintaining the Spa
To ensure your long-term enjoyment, the spa requires
a small amount of attention. The most important fac-
tors are:
¥ Clean the filter on a weekly basis
¥ Replace the filter monthly or when necessary
¥ Keep the spa shell clean
¥ Maintain proper water chemistry
See ÒMaintenanceÓ in the userÕs manual for further
important information.
Heating the Spa
The heating system in your spa is designed to be eco-
nomical for long-term use. Combined with the fact that
water absorbs heat very slowly, the effect is that it will
take 1 to 3 days (depending on the room temperature)
to heat the water in the spa. The good news is that
once the water is heated, it will maintain its tempera-
ture for a relatively low cost. You can reduce the wait-
ing period by filling the spa with hot water, but be
aware that the spa holds more water than your water
heater. Make sure the spa cover is on, and that it is
tight, while the water is heating. The chart below
shows approximate heating times for different air tem-
peratures with a water temperature of 60¡ to 64¡ F.
Water Chemistry
It is important to recognize that maintaining the correct
water chemistry is a fairly complex process, because it
depends on local water conditions and user load.
Since water conditions vary greatly, it is necessary to
consult your local pool and spa supply store to deter-
mine your personal needs.
See the section ÒMaintenanceÓ in the userÕs manual for
further important information.
Quick Guide to Turning On the Spa
¥ Fill the spa with water
¥ Plug in the power cord with GFCI
¥ Press the ON/OFF button on the console
¥ When unit is running, press the ÒTestÓ button on the
GFCI
¥ When the unit has shut off, press the ÒResetÓ button
¥ Apply water chemicals as described in the userÕs
manual
¥ Place the cover on the spa and make sure it is tight
Customer Service
If you have any questions or if you encounter problems
using your spa, please call our customer service
department at 1-800-999-3756, Mon.ÐFri., 6 a.m.Ð6
p.m. MST.
Remove this Part List/Exploded Drawing from
the manual. Save this Part List/Exploded
Drawing and the manual for future reference.
Protect Your Spa Investment
Air Temperature
At least 70¡F
At least 50¡F
At least 30¡F
Heating Time
20 to 28 hours
28 to 48 hours
48 to 72 hours
