background image

4

BEFORE YOU BEGIN

Thank you for selecting the new IMAGE

®

8.25 ellipti-

cal exerciser. The IMAGE 8.25 is an incredibly
smooth exerciser that moves your feet in a natural
elliptical path, minimizing the impact on your knees
and ankles. Welcome to a whole new world of natural,
elliptical-motion exercise. 

For your benefit, read this manual carefully before
you use the elliptical exerciser.

If you have ques-

tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the

product model number and serial number before con-
tacting us. The model number is IMEL2305.1. The
serial number can be found on a decal attached to the
elliptical exerciser (see the front cover of this manual).

To avoid a registration fee for any service needed
under warranty, you must register the elliptical
exerciser at www.iconservice.com/registration.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

FRONT

BACK 

RIGHT SIDE

Pedal Arm

Pedal Disc

Side Shield

Pedal

*No water bottle is included

Upright

Water Bottle Holder*

Console

Upper Body Arm

Wheel

REV–B

209489 & 210125

Summary of Contents for 8.25 Elliptical





















Reviews: