ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included allen wrenches and your own phillips screwdriver ,
rubber mallet , adjustable wrench , and wire cutters .
For help identifying the assembly hardware, see the drawings below.
If a part is not in the parts bag, check
to see if it has been pre-assembled.
1.
Make sure that the power cord is unplugged.
Have a second person hold the Upright Base (48) in the
position shown, with the wheel holes at the top. Identify
the Left Upright (31), which is marked with a sticker.
Orient the Left Upright so the indicated bracket is in the
position shown, and attach the Left Upright to the Upright
Base with two Upright Bolts (40) and two Upright Star
Washers (39).
Do not tighten the Upright Bolts yet.
Nut (47)–4
Handrail Bolt (20)–4
Endcap Screw
(95)–4
Upright Bolt (40)–4
Frame Washer
(33)–2
1/4” Star Washer
(21)–2
Silver Ground
Screw (27)–2
Wheel Spacer (44)–4
Console
Bolt (22)–2
Frame Bolt (32)–2
Wheel Bolt (89)–2
3/4” Screw (2)–8
Upright Star
Washer (39)–4
Handrail Star
Washer (19)–4
48
Wheel Holes
Bracket
40
39
31
1
6
Summary of Contents for 17.0 R Treadmill
Page 23: ...23 NOTES...
