Image Industries QuikLinx SW750, Operation Manual

Page: 11 / 36

Installation & Set Up
Section 2
10
Operating Environment Storage Environment
Temperature -20°C to +40°C (15°F to 104°F) -25°C to +55°C (-15°F to 131°F)
Humidity
H% <=50% at 40°C(104°F)
H% <=90% at 20 °C(68°F)
H% <=50% at 40°C(104°F)
H% <=90% at 20 °C(68°F)
Ambient Air Free from excessive dust, acids, corrosive gasses or substances etc.
Altitude ASL <=1,000m(3,280Ft)
ASL <=1,000m(3,280Ft)
Incline 15° Maximum Incline 15° Maximum Incline
Environmental Conditions
Welding power sources shall be capable of delivering their rated output when the following environmental conditions prevail
Handling Instructions
Mass of the SW750 and its various parts require correct methods of handling them, e.g. by fork-lift.
Unit should not be moved with cables attached. Remove all cables before transporting unit (ground, gun, incoming power).
Unit SHOULD NOT be moved with gas cylinders. Detach and move gas cylinders separately.
WARNING
If using lifting forks, extend forks beyond opposite side of
unit. Locate unit near correct input power supply.
Special installation may be required
where gasoline or volatile liquids are present.
See NEC Article 511 or CEC Section 20.
Caution When Moving