background image

15

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.

A. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable
into the included adapter. Plug the adapter into the
LINE OUT jack on your stereo. 

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable
into the included adapter. Plug the adapter into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the wire
into the unused side of the Y-adapter. Plug the Y-
adapter into the LINE OUT jack on your stereo. 

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable
into the LINE OUT jack on your computer.

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable
into a 3.5mm Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your computer. Plug your headphones or speak-
ers into the other side of the Y-adapter. 

LINE OUT

CD

VCR

Amp

LINE OUT

Audio

Cable

Adapter

A

LINE OUT

Audio

Cable

A

CD

VCR

Amp

LINE OUT

Audio

Cable

RCA

Y-adapter

Wire removed from

LINE OUT jack

B

Adapter

PHONES

Audio

Cable

B

3.5mm 

Y-adapter

Headphones/Speakers

Summary of Contents for IMTL39522































Reviews: