7
2. Attach the Wheels (70) to the Base (52) with two
M10 x 60mm Bolts (35), four Wheel Spacers
(69), and two M10 Nuts (16) as shown.
Do not
overtighten the Nuts; the Wheels should turn
freely.
2
35
35
16
16
69
69
70
69
69
70
1.
Make sure that the power cord is unplugged.
Position the Base (52) upside-down as shown.
Attach four Base Feet (63) to the Base (52) with
four M4.2 x 19mm Tek Screws (26).
1
52
26
26
63
63
63
26
63
52
26
3. Have a second person hold the Base (52) in the
position shown.
Identify the Left Upright (53) (the Right Upright
[54] has a square hole near the lower end).
Hold the Left Upright (53) so that the small
holes are positioned as shown.
Attach the Left
Upright (53) to the Base (52) with two M10 x
58mm Bolts (2) and two M10 Star Washers (9);
do not fully tighten the Bolts yet.
Attach the Right Upright (54) to the Base (52)
in the same way.
3
52
53
2
2
9
9
54
Square
Hole
Small
Holes
