Operating instructions hardware
Image Engineering
iQ-Align for CAL1 / CAL3
Seite
7
von
8
7. CAL3 with iQ-Align for CAL3 is now ready for use.
3 OPERATING INSTRUCTIONS HARDWARE
3.1 Camera positioning
Fix the DUT in iQ-Mobilemount.
Unlock the locking wheel and adjust the DUT position in X direction. Fix the locking wheel and
proceede with the other axes unless your DUT is placed exactly in the center of the diffuser.
4 ADDITIONAL INFORMATION
4.1 Disposal instructions
After the service life of CAL3, it must be disposed properly. Electrical and electromechanical
components are included in CAL3. Observe your national regulations. Make sure that CAL3
cannot be used by third parties after disposing of it.
Contact Image Engineering if assistance for disposal is required.
