Image Engineering
iQ-Align XL
Seite
3
von
5
1 INTRODUCTION
Important information: Read the manual carefully before using the device.
Inappropriate utilization may cause damage to the device, to the DUT (device under test) and/or
other components of your setup.
Keep these instructions in a safe place and pass them to any future user.
1.1 Intended use
Camera positioning system (for CAL3-XL and LE7) based on a freely movable, hydraulically
lockable arm mounted on an adjustable slider that moves along the z-axis. It allows quick and
easy positioning of the DUT in 3D space. Fix the end position with the locking wheel.
•
Only suitable for indoor use.
1.2 Product variants
Due to its adjustable connecting-rings, the iQ-Align is suitable for:
•
CAL3-XL
•
LE7
1.3 Foreseeable misuse
1.3.1 Stuck joints
If the arm moves only when using a lot of force, try to further loosen the locking wheel or check
the joints for dirt or debris.
