Image Access WideTEK 24F, Setup Instructions

Page: 19 / 38

Prepare setup
19
Prepare setup
Connecting the power adapter
WARNING
Risk of electric shock due to incorrect connection.
➢
Ensure that the mains socket is earthed in accordance
with local regulations.
CAUTION
Incorrect routing of the connection cables can cause
tripping, broken bones, bruises and crushing.
➢
Lay the connection cables so that no one can trip over
them.
To connect the power supply, proceed as follows:
➢
Make sure the scanner's main power switch is turned off (0 position).
➢
Use only the supplied power adapter and power adapter cable.
➢
Make sure that the power adapter cable is undamaged.
➢
Connect the low voltage plug to the corresponding DC connector on the
back of the scanner.
➢
Connect the power adapter plug to a power outlet of suitable voltage.
(100-240 V AC)