5 Establishing Connections
Important:
Before connecting the BOOKEYE Color scanner to the mains voltage, check
the following items:
The wall outlet is in perfect condition and properly grounded.
The power cable is undamaged.
The wall outlet is equipped with a correctly dimensioned fuse.
Turn the device off before plugging or unplugging any cable.
Connect the wall outlet and the power supply connector at the BOOKEYE Color with the
power cable.
Picture 3: Connectors on backside
5.1 Main Power
The power connector and the main power switch are located at the right side of the back
of the document bed.
After the main power switch is turned on the green START LED above the START button
lights up.
This indicates that the BOOKEYE Color is ready-to-use.
5.2 Connecting the Network Cable
The BOOKEYE Color scanner is delivered with a cross-over cable (green cable
connectors) and a network cable.
The network connector is located at the back side of the document bed.
Use the cross-over cable in order to connect the BOOKEYE Color scanner directly to a
PC via a network card.
Use the network cable in order to connect the BOOKEYE Color scanner to a network.
Page 16
Operation Manual
