- 15 -
Hand piece Cable Assembly Connection
The hand piece is the housing for the piezo tips. It is the part that you hold during operation. The
hand piece must be attached to the hand piece cable prior to using. To attach, connect the free end
of the cable to the matching receptacle on the back end of the hand piece. Do not twist or turn.
To detach, pull the cable from the hand piece in a straight motion. Do not twist, turn, or yank the
hand piece from the cable.
Polishing Hand Piece Assembly and Start Up.
(Figure 2)
To assemble the polishing hand piece, connect the Prophy Angle, Straight Hand Piece, and Micro-
motor by following the steps below:
1.
Connect the straight hand piece and the micro-motor by pushing the straight hand piece over the
rod of the micro-motor. It should snap into place.
(Figure 3)
