7
3
．
PARTS NAMES
4. INSTALLATION AND ASSEMBLY
(1)
Fuse Rating
Refer to the table below and check that the
power supply voltage fits the fuse rating. To
check the fuse rating, remove the fuse box.
(2)
Filling Maintenance oil
Check that the filter of the funnel is clean.
Remove the oil cap and fill with the funnel.
Fill it to the “full” level, while checking the
oil level gauge. After filling oil, screw the oil
cap back on tight.
DANGER
Do not fill maintenance oil in the room with a risk of an explosion or near open flames.
CAUTION
Oil absorbent sheet
Place an oil absorbent sheet at the bottom of the lubricating and cleaning room of the unit. The oil
absorbent sheet absorbs the maintenance oil that was used for lubricating and cleaning.
Connecting Power Cord
Insert the power cord jack into the inlet at the back of the unit.
