Im-en Export Frijters Rijsbergen B.V LaserOP 3.0, Instruction Manual

Page: 3 / 16

Thank you very much for choosing this laser operated scarecrow from it’s manufac-
turer Im- en Export Frijters Rijsbergen B.V. On the Internet, Im- en Export Frijters
Rijsbergen B.V. uses the name
www.ketrop.com
This Instruction Manual describes the LaserOp “3.0”, hereafter called “LaserOp”, and
contains the necessary instructions to operate, clean and service the device. Only this
way safe operation, proper functioning, and extended device life can be guaranteed.
This Instruction Manual has been compiled with great care. However, should you fi nd
any ambiguities, please contact your supplier before starting the operation of the
LaserOp.
The images in this Instruction Manual are intended as instructive material only and
cannot serve any other purpose.
Please read this Instruction Manual carefully before operating the
device. Always keep this Instruction Manual near the LaserOp as a
reference, in order to have the opportunity to consult the Operating
and Safety Instructions it contains at any time.
Operating the LaserOp is ONLY allowed if this Instruction Manual is
thoroughly known and understood!
The operator should respect all Usage Requirements and enforce these
within his company.
1.1 WARRANTY
For this point, the General Terms & Conditions of Im- en Export Frijters Rijsbergen
B.V. are applicable. Im- en Export Frijters Rijsbergen B.V. cannot be held liable for any
injuries or damages that may occur, if the LaserOp is used in any other way than those
described in the Intended Use, the Operating Instructions and the Usage Require-
ments, and/or if the LaserOp had been modifi ed in any way.
© Copyright
Nothing within this edition may be copied, reproduced or stored onto a retrieval
system without the written approval of Im- en Export Frijters Rijsbergen B.V.
This is a translated copy of the original Instruction Manual, written in the Dutch
language.
1 INTRODUCTION
3