Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.
OPERATING GUIDE
5. VERIFY
This function will check your master disc and the copied discs’ readability to ensure that all of your copies are
readable.
a.
Put master source disc and all copied discs into the duplicator,
b.
Press
OK
. The duplicator will then automatically start loading the disc, analyzing the source disc and start
verification.
c.
When verification is finished, the duplicator writer trays will automatically eject.
Verify 79:45
5.Verify
7 disc detected
Press
OK
to load discs
Loading Disc
Verify 79:45
Analyzing
source disc
Verify 79:45
Analyze Disc…
Start
verification
45% 35:45
100%Finished
and eject discs
6. COMPARE DISC
Use this function to make a
bit-by-bit Comparison
between Master Reading Source and all the copied discs
inside the writer tray. This operation is to ensure all of your copies have the same exact information as your Master
Reading Source.
a.
Put master source disc and all copied discs into the duplicator,
b.
Press
OK
. The duplicator will automatically start loading the disc, analyzing the source disc and start the
Comparison function.
c.
When the Comparison is finished, the duplicator writer trays will automatically eject themselves.
Compare 79:45
6.Compare
7 discs detected
Press
OK
to load discs
Loading Disc
Analyzing
source disc
Compare 79:45
Analyze Disc…
Start
Comparison
Compare 79:45
45% 35:45
100%Finished and
eject disc
Note : You can ONLY use the compare function when you are duplicating DATA discs
.
