ILVE PRO-LINE, Operating & Installation Manual

Page: 34 / 46

34
- The appliance can be installed freestanding (class 1).
- The appliance can be installed between two pieces of furniture (class 2/1).
- The cooker is protected against excessive overheating, so it may be installed next to
furniture with a height no higher than that of the worktop. The wall in contact with the
back of the cooker must be made of fire-resistant material. To install the cooker correct-
ly, take the following precautions.
A. Any furniture in the vicinity of the cooker with a height higher than that of the worktop
must be at least 50mmfrom the edge of the top;
B. The extractor hood must be installed in the way indicated in its instructions booklet,
and always at a minimumdistance of 650 mm from the top of the hob;
C. If the cooker is installed under a wall unit, the minimum distance between this unit
and the worktop must be 650mm (millimeters).
INSTALLATION
- Installation of the cooker
Positioning of the
appliance between
furniture