23
USER
The ceramic hob remains hot for a long time after use. Do not touch the hob with
your hands or let children near it. The residual heat indicator will remain on until the
hob has cooled down.
If any cracks appear in the ceramic hot, disconnect the appliance immediately from
the mains and call an authorized technical service centre.
The positions are clearly indicated by the rings.
Area Diameter Ø Power
P1 220 mm 1800 W
P2 180 mm 1800 W
Heat zones are clearly indicated by these circular areas. When one or more cooking
areas are being used, the remaining surface stays cold. Each cooking area is desi-
gned to work with the cookware specific for induction cooking, with a diameter just less
than the diameter of the selected cooking area.
The bottom of the pan must be thick and flat. Its diameter must be as similar as possi-
ble to that of the cooking ring. The surface of the hob and the bottom of the pan must
be kept clean.
Do not wet or overheat the heating plates.
Avoid sudden changes in temperature on the ceramic hob. For example, do not
pour cold water onto the hot hob.
Do not leave the pan handles sticking out as they could be spilled accidentally.
It is preferable not to cook on the ceramic hob with pans that have been used on
gas burners. The flames will have deformed the bottom of the pans.
Ventilation of the hob is completely automatic. The cooling fan for the electronics
located under the hob works at slow speed up to the temperature level of the
electronics. When the hob is used for a long time the speed of the cooling fan
increases. As soon as the electronics have been cooled the fan stops automatically.
INDUCTIVE ELECTRIC
PLATE
ATTENTION!
Precautions to avoid
damaging the appliance
Ventilation
INSTRUCTIONS FOR USE
– Use of the inductive electric plate
•
•
•
•
P1
P2
Summary of Contents for MAJESTIC M09
Page 68: ......
